dalplex

Regular Members
  • Content count

    180
  • Joined

  • Last visited

Everything posted by dalplex

  1. A full set in goog order. asking for 50.
  2. All in good condition. Make your offer.
  3. Hi, looking for 451 muffler. The joint between the flexpipe and muffler is leaking and it and it seems not easy to be replaced with universal flexpipe. please advise the condition and cost. thanks
  4. It is original but broken between the flexicoupler and the muffler. May be useful as the muffler itself has nothing wrong with. asking 200 obo.
  5. Bought new assembly from dealer and installed in 2 hour. The original one will be available for sale.
  6. Mig welded them together after failed by bronze. Then realized the alignment on the flange was off and basically can not seal. So, after fighting with rear flange bolt and putting back the rear panel for 2 hours end with square back to original. I think a dealer part of 485 is right choice.
  7. Get a quote today for 345.
  8. Thanks. If the connection has a little bit of straight pipe to clamp. Yes. It is fairly easy. The problem is the elbow shape connection is so short, making it barely possible to play with. I will try to put on some putty and tape first.
  9. Hi, low usage age of this grand style for sale. 189 k. Note:16 rim and tire is optional for another 1000. Asking for 4000.
  10. Condition is good. Egr valve cleaned. 2006 Grand Style convertible with 16" Spikeline rims. 176K. Asking for 7000 obo. 2008 passion just over 70k with 15"+17" Brabus rims with 7000 tag.
  11. Another set of rim 5.5/15/e30 with 175/55/15. Fit front of 451?
  12. Rear rim normally has negative offset. This one's e30 is close to front rim's offset.
  13. My 450 was nothing wrong before winter but developed some laziness after 3 month. From what I noticed of symptoms. It is in limp mode. However, there is no code. Whai should do after trying to lub the wastegate? Thanks
  14. Everything is all right after erg clean up.
  15. Running into another trouble. Drilled out an e8 bolt and thinking about replacing with Allen head . Best guess is M7 X1 as it seems smaller than the standard m 7 die. The trouble is it seems m7x1 is not common size.
  16. Thanks fir all the advice. End up running of time. Bought two from dealer. Did see some from Europe,nice looking and last fir ever stainless steel Allen head.
  17. I really do not understand why this bolt is so badly angled and how it was installed. Please advice your tips. Thanks
  18. Eventually grind and drill off. Really do not want to try again.
  19. Will try saw box wrench if still can bite on it. Had chance buying e torx wrench but did not buy. Now stuck in here. Others are easy without any trouble.
  20. Thanks. All I have is a gear spanner but it is too big. I am even thinking about cut a ring from socket and weld with a handle.
  21. Get everything of egr off but one of the e8 circulation bolt.
  22. Condition is good. Egr valve cleaned. 2006 Grand Style convertible with 16" Spikeline rims. 176K. Asking for 7000 obo. 2008 passion just over 70k with 15"+17" Brabus rims with 7000 tag.
  23. will check egr first. then might need start mechine.
  24. It does not shift up to 5/6 although manually can be done. In those case, rpm did not lower. It is annoying as some time can not engaged to gear at intersection for green light. The car just not moving and rpm not going up too much neither. I could drive it on 100 kmh with pedal on floor but rpm seldem pass 3000. All in all make me suspect it is on limp mode.