Jump to content


Online Users

5 members, 40 visitors and 1 anonymous users

Bing, dmoonen, Yahoo, Google Mobile, FlossyTheSmart, Google, Surturiel, Huronlad, David_18

Latest Discussions

9
Jan 2015
Despite being early in the new year, there are already plans for a number of different smart events in 2015.  While many of these events are based in the US, Canadians are more than welcome to attend those as well.  There are also a few Canadian events in the planning phases as well, so have a look at those too!
 
Probably the first large event of the year is the Ohio April Fools rally, taking place April 10th-12th, 2015.  The rally will be held somewhere around Central Ohio (Location not yet determined), and is being organized by jwight.  Last years rally ended with the group touring the Ohio State Reformatory, the filming location of The Shawshank Redemption.  For further details on this years event, click through to the SCoA thread HERE
 
The next major event of the year is the Midwest Smart Rallye, "Meet me in St. Louie".  This event is taking place in St. Louis, Missouri from June 5th to 7th.  This one is shaping up to be a big event, with 20 cars signed up already.  For more details on the midwest rally, click HERE
 
Proposed for the same time frame is the Summer Blat, starting in Red Deer, Alberta, and ending in Lake Louise, Alberta.  The schedule outlined puts the event as running from June 5th until June 8th.  If you are interested in this event, post over in the thread HERE
 
Following up after that is the ever popular "OutSMARTing the Dragon" event.  Running from August 20th to August 23rd, this event pits drivers against the twisty-turny Tail of the Dragon, also known as US 129.  The Tail of the Dragon is an 11 mile stretch of road through the foothills of the Smoky Mountains, with 318 curves.  The event will be based out of the Fontana Village Resort in Fontana Dam, North Carolina.  For the full details, follow THIS link.
 
Finally, one event which is still in the "gathering interest" phase, is a 2015 Summer Driver's Training event that Mike T is looking to put together.  The event would be at a track (potentially Pitt Meadows or the Mission Raceway) in BC.  This event also holds the potential of being another 10th Anniversary of Smart in Canada event.  Because this event is just gathering interest, there is no set date.  If you are interested in participating in this, or would like to provide some input, look HERE
 
Any events I missed?  Leave a comment below and we can add more information!

2
Nov 2014
A separate registry of the smart fortwo 450's that were imported into the USA by G&K has now been put online!  Currently we have 114 of the cars in our registry, and are looking to find and enter the information for the rest of them.  The registry can be found HERE, or under the "Car Registries" menu at the top of the page.  The same disclaimer as we applied for the Canadian registry applies here:
 

ClubsmartCar (being the collectivity of forum members and other contributors to this Registry) provides all data contained within this Registry without cost and "as is", without any express or implied warranties as to their accuracy with respect to any data concerning all motor vehicles contained therein. This also excludes any warranties of merchantability or fitness for a particular purpose, such as in assisting in making a decision to purchase or not purchase a used car. 

ClubsmartCar has compiled all the information contained in this Registry in good faith. ClubsmartCar has taken reasonable care to ensure this information is accurate. However, ClubsmartCar cannot accept liability for any claims, actions and demands arising from or relating to losses due to the accuracy of any of the information contained within this Registry.
 

 
Should you have any comments to make regarding this Registry and its contents, please send a PM to FlossyTheSmart, or leave a comment below.  If you've got updates to make though, feel free to edit the information yourself!

31
Oct 2014
ClubsmartCar has prepared a comprehensive Registry of all smart 450s (1998-2006 models) that we are aware of in North America.  We certainly have all 10,239 of the Canadian 450s, and we are making headway on adding the approximately 1,300 US 450s that were converted to meet US DOT certification by G&K in California.

In compiling the data within the Registry, we have added information concerning the colours and options that the cars spotted in person or on the Internet are known to have, whether they have been in collisions or have been declared “Salvage”, “Scrapped”, “Rebuilt”, or whether the engine is known to have had a serious internal failure.  This information has been collected from various sources.  It may therefore be of variable quality.  However, we hope that you find it interesting, and useful.

We are also looking to have updated information added from time to time, and in this quest, any information that you may be able to contribute may be submitted, and may be displayed after the content is reviewed.

As time and circumstances allow, we will be adding the 451 and eventually the 453 model to the Registry.

The Canadian 450 registry can be found HERE, or by following the "Car Registries" menu at the top of the page.

Disclaimer:
ClubsmartCar (being the collectivity of forum members and other contributors to this Registry) provides all data contained within this Registry without cost and "as is", without any express or implied warranties as to their accuracy with respect to any data concerning all motor vehicles contained therein.  This also excludes any warranties of merchantability or fitness for a particular purpose, such as in assisting in making a decision to purchase or not purchase a used car.

ClubsmartCar has compiled all the information contained in this Registry in good faith. ClubsmartCar has taken reasonable care to ensure this information is accurate. However, ClubsmartCar cannot accept liability for any claims, actions and demands arising from or relating to losses due to the accuracy of any of the information contained within this Registry.

Should you have any comments to make regarding this Registry and its contents, please send a PM to FlossyTheSmart, or leave a comment below.  If you've got updates to make though, feel free to edit the information yourself!


Recently Added Posts

Recent Wiki Edits


Shoutbox - Chat with members! Open the Shoutbox in a popup

    @  dmoonen : (27 August 2015 - 08:06 AM) Spring compresssors are still needed. .Tolson why must you take the hard way to everything
    @  Surturiel : (26 August 2015 - 03:59 PM) nah, the springs are broken, and I can use the ye old zip-tie trick. But since I'm going to put eibachs (-25mm) I won't worry.]
    @  tolsen : (26 August 2015 - 03:43 PM) Clamp type spring compressors should not be used since the damage both protective coating and spring.
    @  dmoonen : (26 August 2015 - 11:27 AM) The spring compressors you can borrow at Canadian tire
    @  dmoonen : (26 August 2015 - 11:27 AM) I have the Mercedes strut clamp you can borrow just pay shipping and if you break it you buy it. Pm me
    @  Surturiel : (26 August 2015 - 08:51 AM) thanks, guys! And... does anyone in Vancouver area have the clamp so I can "rent"?
    @  dmoonen : (25 August 2015 - 06:43 PM) To and from SK*. I'm just waiting on some bits to finish the Golf build
    @  dmoonen : (25 August 2015 - 06:41 PM) Still driving it, drove it to and from and average 4.7l/100l loaded to the brim.
    @  Francesco : (25 August 2015 - 06:19 PM) Dillen how much did you end up getting for the wagon?
    @  Francesco : (25 August 2015 - 05:13 PM) And if replacing the plastic bellows (dust boots) on the struts, cut a good 1.5" off the bottoms of them or they'll just compress around the stops and get in the way of the clamp tool
    @  Francesco : (25 August 2015 - 05:11 PM) also, take a new knife blade and cut about an inch off the bump stops unless you love bottoming out on small bumps.
    @  Francesco : (25 August 2015 - 05:09 PM) wont need it for the Eibachs
    @  Francesco : (25 August 2015 - 05:09 PM) If the springs are broken at the top as suspected, the spring compressor might not be necessary.
    @  dmoonen : (25 August 2015 - 04:49 PM) And a normal spring compressor
    @  dmoonen : (25 August 2015 - 04:46 PM) Strut clamp tool*
    @  dmoonen : (25 August 2015 - 04:46 PM) Lots of penetrating oil on the top nut and see if you can borrow a strut tool of you don't have the proper air tools
    @  Surturiel : (25 August 2015 - 01:08 PM) Now, let's see if I can replace them without getting myself killed...
    @  Surturiel : (25 August 2015 - 01:07 PM) Got the Eibach springs!
    @  dmoonen : (25 August 2015 - 12:29 PM) Lol
    @  Francesco : (25 August 2015 - 10:18 AM) ok, maybe MikeT
    @  Francesco : (25 August 2015 - 10:18 AM) Who doesn't? Hehehe
    @  dmoonen : (25 August 2015 - 07:46 AM) sounds like you have a decent to do list. .
    @  Surturiel : (23 August 2015 - 08:00 PM) Perhaps even throw a set of powerflex purple bushings, and a set of 16" "space" wheels, but not now...)
    @  Surturiel : (23 August 2015 - 07:58 PM) ( I WILL replace the entire control arm, with all 4 ball joints, drop links, all the upper bearings and a nice set of B8s. But not now. Maybe by December, when I get money for that...
    @  Surturiel : (23 August 2015 - 07:57 PM) Nah, the steering damper is fine (I was worried about that too), and actually, the bearing is not bad, its just the pad that is glazed.
    @  Francesco : (23 August 2015 - 02:07 PM) also check your steering damper. If the damage is already extensive, good chance the damper has bled out like mine had
    @  Francesco : (23 August 2015 - 02:06 PM) but honestly if you are removing the control arms, you may as well replace the other parts. Use the Evilution or FQ guides, and add in tolsen's tips about reversing the BJ bolts, and using SS bolts and nuts if possible.
    @  Francesco : (23 August 2015 - 02:04 PM) The right bearing might turn out to be a seized caliper or delaminated pad...
    @  Surturiel : (22 August 2015 - 09:20 PM) I lifted the car today, and upon inspection, I saw that the ball joints and the drop links are fine. The bushings are probably busted (they are noisy and rough), and the right bearing is heavy and noisy. I couldn't see if the springs are broken or not, but both top collars are loose. (I'll trust CANMAN on that one). But I was getting ready to replace ALL ball joints, drop links, control arms, shocks...
    @  Francesco : (22 August 2015 - 07:58 PM) So who was it that told you all that stuff was kaput? I seem to remember being puzzled about how extensive your list was
    @  CANMAN : (22 August 2015 - 06:52 PM) Because both springs are broken at the top.
    @  Surturiel : (22 August 2015 - 02:06 PM) Oh, and the right bearing is kaput.
    @  Surturiel : (22 August 2015 - 02:06 PM) I finally lifted my smart. And to my surprise, both front springs, shocks, drop links and ball joints seem to be in good condition! What are NOT good are the top collars. Neither springs are sitting on them. How come?
    @  Surturiel : (22 August 2015 - 02:03 PM) Hi, smart owners
    @  Th3Guardian : (22 August 2015 - 09:23 AM) Hey everyone in the Ottawa area, I made a post today about my 9 spoke rims being stolen. The post has a picture of the rims. I'd anyone sees them please let me know.
    @  Surturiel : (21 August 2015 - 09:07 AM) good to know!
    @  dmoonen : (21 August 2015 - 08:44 AM) Canadian tire amungst other autoparts stores rent out or loan tools fyi :)
    @  Surturiel : (20 August 2015 - 05:53 PM) I'm going to rebuild the suspension myself, from scratch. All Febi. and Bilstein b8's
    @  Surturiel : (20 August 2015 - 05:52 PM) Oh! poor smart owner question: does anyone have a bushing press around Vancouver that I can rent/borrow?
    @  Surturiel : (20 August 2015 - 05:51 PM) ok, I'm just poor, then
    @  marchanna : (20 August 2015 - 05:22 PM) I think that's pretty reasonable seeing as a nice leather jacket costs about $500
    @  Surturiel : (20 August 2015 - 05:21 PM) Question: Is around 2k and absurd amount of money for a complete leather interior, or is I that have no money?
    @  Francesco : (20 August 2015 - 03:41 PM) Hehehe my oil-jug IC scoop touches the pavement when the suspension bottoms out on whoopdedoos out on country roads...
    @  marchanna : (20 August 2015 - 06:20 AM) I would say, turn them in until they stop, then an extra 1/4 or 1/2 turn.
    @  marchanna : (20 August 2015 - 06:16 AM) Very little torque. Just snug is fine.
    @  Francesco : (19 August 2015 - 11:11 PM) oh sorry. Torque? Never used an actual setting in 35 years of bleeding brakes. I just snug them by feel.
    @  Francesco : (19 August 2015 - 11:10 PM) M10x1.0
    @  steveyfrac : (19 August 2015 - 07:57 PM) Anyone know the torque specs on the 451 brake bleeder screws?
    @  Francesco : (19 August 2015 - 09:54 AM) I'd actually like the windows to go UP with the fob, not down.
    @  Francesco : (19 August 2015 - 09:53 AM) Thanks, yeah found it after I posted last night, thanks! Did you also hook up the negative trigger wire to the unlock circuit?
    Resize Shouts Area

  • 319,838 Total Posts
  • 5,643 Total Members
  • grumpy Newest Member
  • 399 Most Online

45 users are online (in the past 15 minutes)

5 members, 39 guests, 1 anonymous users   (See full list)


Bing, dmoonen, Yahoo, Google Mobile, FlossyTheSmart, Google, Surturiel, Huronlad, David_18


Portal v1.4.0 by DevFuse | Based on IP.Board Portal by IPS