Jump to content


Online Users

5 members, 32 visitors and 1 anonymous users

marchanna, Bing, Yahoo, Google, Huronlad, yellow bumble bee, Pingu, FlossyTheSmart

Latest Discussions

28
Aug 2015
From the article:
The countdown has started for the new fortwo cabrio, a particularly iconic variant of the new model series. The open-top two- seater will have its world premiere in September at the International Motor Show in Frankfurt. The new smart cabrio will launch in the United States in early summer of 2016.
 
Photos and article - 2016 Smart Fortwo Cabrio – Official
 
.
 

9
Jan 2015
Despite being early in the new year, there are already plans for a number of different smart events in 2015.  While many of these events are based in the US, Canadians are more than welcome to attend those as well.  There are also a few Canadian events in the planning phases as well, so have a look at those too!
 
Probably the first large event of the year is the Ohio April Fools rally, taking place April 10th-12th, 2015.  The rally will be held somewhere around Central Ohio (Location not yet determined), and is being organized by jwight.  Last years rally ended with the group touring the Ohio State Reformatory, the filming location of The Shawshank Redemption.  For further details on this years event, click through to the SCoA thread HERE
 
The next major event of the year is the Midwest Smart Rallye, "Meet me in St. Louie".  This event is taking place in St. Louis, Missouri from June 5th to 7th.  This one is shaping up to be a big event, with 20 cars signed up already.  For more details on the midwest rally, click HERE
 
Proposed for the same time frame is the Summer Blat, starting in Red Deer, Alberta, and ending in Lake Louise, Alberta.  The schedule outlined puts the event as running from June 5th until June 8th.  If you are interested in this event, post over in the thread HERE
 
Following up after that is the ever popular "OutSMARTing the Dragon" event.  Running from August 20th to August 23rd, this event pits drivers against the twisty-turny Tail of the Dragon, also known as US 129.  The Tail of the Dragon is an 11 mile stretch of road through the foothills of the Smoky Mountains, with 318 curves.  The event will be based out of the Fontana Village Resort in Fontana Dam, North Carolina.  For the full details, follow THIS link.
 
Finally, one event which is still in the "gathering interest" phase, is a 2015 Summer Driver's Training event that Mike T is looking to put together.  The event would be at a track (potentially Pitt Meadows or the Mission Raceway) in BC.  This event also holds the potential of being another 10th Anniversary of Smart in Canada event.  Because this event is just gathering interest, there is no set date.  If you are interested in participating in this, or would like to provide some input, look HERE
 
Any events I missed?  Leave a comment below and we can add more information!

2
Nov 2014
A separate registry of the smart fortwo 450's that were imported into the USA by G&K has now been put online!  Currently we have 114 of the cars in our registry, and are looking to find and enter the information for the rest of them.  The registry can be found HERE, or under the "Car Registries" menu at the top of the page.  The same disclaimer as we applied for the Canadian registry applies here:
 

ClubsmartCar (being the collectivity of forum members and other contributors to this Registry) provides all data contained within this Registry without cost and "as is", without any express or implied warranties as to their accuracy with respect to any data concerning all motor vehicles contained therein. This also excludes any warranties of merchantability or fitness for a particular purpose, such as in assisting in making a decision to purchase or not purchase a used car. 

ClubsmartCar has compiled all the information contained in this Registry in good faith. ClubsmartCar has taken reasonable care to ensure this information is accurate. However, ClubsmartCar cannot accept liability for any claims, actions and demands arising from or relating to losses due to the accuracy of any of the information contained within this Registry.
 

 
Should you have any comments to make regarding this Registry and its contents, please send a PM to FlossyTheSmart, or leave a comment below.  If you've got updates to make though, feel free to edit the information yourself!


Recently Added Posts

Recent Wiki Edits


Shoutbox - Chat with members! Open the Shoutbox in a popup

    @  Francesco : (03 September 2015 - 10:53 PM) dont forget to book an alignment with a reputable shop after e front is done. Either a smart dealership, or a shop that has done 450s before
    @  Francesco : (03 September 2015 - 10:52 PM) Hehe if there are enough kms on your smart, they were probably sagging by a good 20 mm already. Go for a drive and you'll immediately fall in love with the progressive eibachs
    @  Surturiel : (03 September 2015 - 09:57 PM) but the rear is done... I was kinda expecting a... more noticeable drop...
    @  Surturiel : (03 September 2015 - 09:56 PM) By the way, F***ing cheap acordion jack... used twice. the bar broke...
    @  dmoonen : (03 September 2015 - 03:21 PM) Lift the rear end up nice and high and drop the suspension and stuff a little scissor jack in there for clearence.
    @  dmoonen : (03 September 2015 - 03:16 PM) Rears are the easy part. .
    @  Surturiel : (03 September 2015 - 11:52 AM) I was expecting the rear spring swap to be easy. but that was ridiculous...
    @  dmoonen : (03 September 2015 - 09:14 AM) Woop whoop
    @  Surturiel : (02 September 2015 - 08:15 PM) time to have some fun
    @  Surturiel : (02 September 2015 - 08:15 PM) the parts came in!
    @  Mike T : (29 August 2015 - 07:33 AM) I've no idea! Sorry, I rarely went there anyway. I think they had "issues". Driving to Banff today in the rain in prep for a 290 km bike ride from Jasper to Banff. Cheers
    @  Francesco : (28 August 2015 - 11:24 PM) Ah. Just found Martin's tweet from January, but its link is dead so I have no details of why the club was dissolved
    @  Francesco : (28 August 2015 - 10:49 PM) Hey Mike, what happened to CsQ? I haven't logged in in over a year, but it seems the lights aren't on...?
    @  Francesco : (28 August 2015 - 10:39 PM) keep you eyes on the classifieds here, SCoA and CsQ, as well as Kijiji. Deals on rims pop up from time to time.
    @  Francesco : (28 August 2015 - 10:36 PM) and yes, you'll find even with a one inch drop there is plenty of arch gap. I'm -1.25 in the front and -1.4 out back and it could go lower (but would drive balls). I hate the useless stanced look.
    @  Francesco : (28 August 2015 - 10:34 PM) Figure a good $1400 or more to your door.
    @  Francesco : (28 August 2015 - 10:33 PM) Ouch. The shipping will be more than the (discounted) 19% VAT, and then you'll likely get a collect bill from Canada Post for GST/PST and duties.
    @  Surturiel : (28 August 2015 - 05:15 PM) I found these: http://www.rs-parts....r-smart450.html
    @  Surturiel : (28 August 2015 - 05:15 PM) Question: With the lowered springs (Eibach, 25mm), can I still put a set of 16" on my limousine?
    @  Surturiel : (28 August 2015 - 05:14 PM) I'll see what I can do...
    @  Francesco : (28 August 2015 - 08:56 AM) Check with Fast Eddy to see if he'll rent you the correct tool for cheap.
    @  Surturiel : (27 August 2015 - 02:43 PM) (like copper or aluminium)
    @  Surturiel : (27 August 2015 - 02:43 PM) I'll try with something hard, but not as hard as steel
    @  Francesco : (27 August 2015 - 02:42 PM) tolsen has posted about it before. Personally I thought a couple hours of tinkering was time better spent elsewhere, and the $50 for the tool well spent
    @  Francesco : (27 August 2015 - 02:41 PM) you need a hardwood, soft won't do
    @  Surturiel : (27 August 2015 - 02:41 PM) no worries, got the idea
    @  Francesco : (27 August 2015 - 02:40 PM) the hole being the exact size of the rod, not the disc. Sorry about the syntax
    @  Francesco : (27 August 2015 - 02:39 PM) A wooden clamp would work well. Drill a hole in a wooden disc the exact size of the strut rod's diameter, then cut the disc in half and add flats
    @  Surturiel : (27 August 2015 - 02:13 PM) leather is too soft, as is rubber. I was thinking about either copper wire wound around the strut or tinfoil. and a vise Grip
    @  Francesco : (27 August 2015 - 02:11 PM) An old leather belt might work better, but I had no luck with it
    @  Surturiel : (27 August 2015 - 02:10 PM) (I was thinking about a vise grip and tinfoil. you know, tinfoil is aluminum, and can potentailly protect the shock, and a vbise grip is FAR more useful than the clamp, but this is me trying to Mcgiver a solution, as usual...)
    @  Surturiel : (27 August 2015 - 02:07 PM) ah, ok, then
    @  Francesco : (27 August 2015 - 02:06 PM) The strut spins freely, you need the special clamping tool to provide flats for a big open ended wrench (with this tool 47 mm)
    @  Surturiel : (27 August 2015 - 02:03 PM) Can't I use LOTS of wd40, a t47 bit and a breaker bar?
    @  Francesco : (27 August 2015 - 02:01 PM) The strut clamp is a necessity. Worth every cent I paid -- making something similar myself would have taken me more time than I'd like to spend in order to save the few bucks.
    @  Surturiel : (27 August 2015 - 02:00 PM) c'mon! I'll use twine. And optimism.
    @  Francesco : (27 August 2015 - 01:59 PM) I honestly didn't need them on the broken spring, and while handy for the lowering springs, not necessary.
    @  dmoonen : (27 August 2015 - 08:06 AM) Spring compresssors are still needed. .Tolson why must you take the hard way to everything
    @  Surturiel : (26 August 2015 - 03:59 PM) nah, the springs are broken, and I can use the ye old zip-tie trick. But since I'm going to put eibachs (-25mm) I won't worry.]
    @  tolsen : (26 August 2015 - 03:43 PM) Clamp type spring compressors should not be used since the damage both protective coating and spring.
    @  dmoonen : (26 August 2015 - 11:27 AM) The spring compressors you can borrow at Canadian tire
    @  dmoonen : (26 August 2015 - 11:27 AM) I have the Mercedes strut clamp you can borrow just pay shipping and if you break it you buy it. Pm me
    @  Surturiel : (26 August 2015 - 08:51 AM) thanks, guys! And... does anyone in Vancouver area have the clamp so I can "rent"?
    @  dmoonen : (25 August 2015 - 06:43 PM) To and from SK*. I'm just waiting on some bits to finish the Golf build
    @  dmoonen : (25 August 2015 - 06:41 PM) Still driving it, drove it to and from and average 4.7l/100l loaded to the brim.
    @  Francesco : (25 August 2015 - 06:19 PM) Dillen how much did you end up getting for the wagon?
    @  Francesco : (25 August 2015 - 05:13 PM) And if replacing the plastic bellows (dust boots) on the struts, cut a good 1.5" off the bottoms of them or they'll just compress around the stops and get in the way of the clamp tool
    @  Francesco : (25 August 2015 - 05:11 PM) also, take a new knife blade and cut about an inch off the bump stops unless you love bottoming out on small bumps.
    @  Francesco : (25 August 2015 - 05:09 PM) wont need it for the Eibachs
    @  Francesco : (25 August 2015 - 05:09 PM) If the springs are broken at the top as suspected, the spring compressor might not be necessary.
    Resize Shouts Area

  • 319,974 Total Posts
  • 5,651 Total Members
  • TDriz Newest Member
  • 399 Most Online

37 users are online (in the past 15 minutes)

5 members, 31 guests, 1 anonymous users   (See full list)


marchanna, Bing, Yahoo, Google, Huronlad, yellow bumble bee, Pingu, FlossyTheSmart


Portal v1.4.0 by DevFuse | Based on IP.Board Portal by IPS