Jump to content


Toggle shoutbox Shoutbox - Chat with members! Open the Shoutbox in a popup

@  KurtMan : (30 September 2014 - 12:49 PM) It was in fact the PY21 bulb that was burnt, the Canadian Tire associate insisted his computer system was correct and gave me 7528 bulbs. So I will return the bulbs and educate him when I return ��
@  stickman007 : (29 September 2014 - 02:29 PM) I bought a set of triple square from Mac Tools...the only one I ever use was 8mm for the CV
@  Francesco : (29 September 2014 - 09:16 AM) Yeah, ok. Buddy brought over his wife's 2000 Beetle TDI for a detail and I wanted to adjust the doors, but the strikers and hinges both had triple square bolts.
@  dmoonen : (29 September 2014 - 09:01 AM) Had to buy a couple sets for working on my vw's, basicly bbs rims, axels and a outher parts require them including the injector pump on the ALH's. I don't think there's a single one on the smarts that I recall mostly torx, etorx and standard sockets.
@  dmoonen : (29 September 2014 - 08:59 AM) VW need them but smarts no so much
@  Francesco : (29 September 2014 - 08:41 AM) I never noticed, does the 450 use any triple-square bolts? Does the 451? The set will be handy for when I work on Dubs, but was wondering about smarts, too.
@  Francesco : (28 September 2014 - 09:38 PM) The turn signal bulb? Or the bulb that would normally go in the empty BA15s socket below the top brake lamp? The TS is PY21W or P21W, while the one in the empty socket is R5W (207), a 5 Watt bulb. Note than on Canadian 450s that socket isn't connected to any power or earth.
@  KurtMan : (28 September 2014 - 06:00 PM) Thanks guys, I forgot to say it's a 450.
@  FlossyTheSmart : (28 September 2014 - 05:37 PM) WHich is a yellow bulb, despite being behind a red lens
@  FlossyTheSmart : (28 September 2014 - 05:36 PM) Oh, missed the lower break light correction. I think that is a PY21W
@  FlossyTheSmart : (28 September 2014 - 05:32 PM) I want to say P21W - I was just changing bulbs on my cabrio yesterday and it's actually on the plastic casing what bulbs are meant to go there - that's what I remember. I'm sure Evilution will have it there somewhere too.
@  marchanna : (28 September 2014 - 03:07 PM) I'm not sure if 450's are the same
@  marchanna : (28 September 2014 - 03:07 PM) On 451 models it's a 7528
@  marchanna : (28 September 2014 - 03:03 PM) What year?
@  KurtMan : (28 September 2014 - 02:52 PM) *I should specify lower break light.
@  KurtMan : (28 September 2014 - 02:48 PM) Does anyone know what the bulb type is in the lower part of a cabrio tail light?
@  amr530711 : (27 September 2014 - 02:16 PM) it's got a hard short on the black cable running from the positive post to the rear of the car - does that connect to the starter or to the alternator? This car seems to eat alternators, and the blackout happened at roughly the same time as the alternator would kick in, just a couple of seconds after moving forward.
@  stickman007 : (27 September 2014 - 01:52 PM) Check your connection at the battery terminals? I think somebody here in the forum had the battery cable melted once...
@  amr530711 : (27 September 2014 - 11:55 AM) hey everyone! I'm having a hard time with the new search, I'm looking for information about a total electrical failure. I started the car, drove about 50 feet, it bucked, the instrument cluster went out, back on, then completely off. and now I have no electrics at all. no four way flashers, can't roll up the window, car won't lock, absolutely nothing happens when I turn the key. Not sure what words to use in the search. any help would be appreciated
@  Francesco : (27 September 2014 - 07:10 AM) And a whole set of triple square bits off Amazon for $25. SnapOn rep said they're special order, and each bit is close to $30!!!

Photo

Fuse box layout


  • Please log in to reply
3 replies to this topic

#1 RichHelms

RichHelms
  • Regular Members
  • 2,509 posts
  • Gender:Male
  • Location:Sunderland, ON

Posted 26 November 2007 - 03:47 PM

Does anyone have a fusebox layout with diagram with what each fuse does and the correct value?I am trying to find the power window fuse and correct value.Thanks
www.RichHelms.com - collection of my writings

#2 Kofångar-Lasse

Kofångar-Lasse
  • Regular Members
  • 363 posts
  • Gender:Male
  • Location:Göteborg,Westcoast of Sweden,PeninsulaScandinavia

Posted 26 November 2007 - 03:58 PM

The most close to Your 800 cdi must be ...

http://www.evilution...=...88&men=info

30 A for shure ! ... Have You lost Your instruction book ?

Yours CcL

Also to be found at facebook

My 1st:
'02 600 cc Gas CityCoupé, 61 remapped to 77 hp by tm-chiptuning.se
alu-Cc, Keyless windows, Gearshift paddles, tow hitch from
misterdotcom.de

My 2nd:
'05 700 cc Gas ForTwo Cab, Tridion Silver, True Blue Metallic, 61 remapped to 82 hp,
alu-Cc, Keyless windows, Gearshift paddles ...

My 3rd:
'02 600 cc Gas Crossblade, 71 hp, Gearshift paddles to come ...

"The 450½-Mod".

#3 RichHelms

RichHelms
  • Regular Members
  • 2,509 posts
  • Gender:Male
  • Location:Sunderland, ON

Posted 26 November 2007 - 04:28 PM

I think that is called duh!!!I knew I had seen a diagram but was looking in all of the wrong places.Thanks. Fixed now
www.RichHelms.com - collection of my writings

#4 kitkatt1960

kitkatt1960
  • New Members
  • 3 posts
  • Gender:Female
  • Location:Medicne Hat, Alberta, Canada

Posted 21 February 2011 - 10:51 AM

Does anyone have a fusebox layout with diagram with what each fuse does and the correct value? I am trying to find the power window fuse and correct value. Thanks

I just tried this site.... worked exactly for my smart... not certain of yours... http://www.evilution.co.uk/501 fred




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users